Operator Brief

I Skipped Cybex to Save $170K. 14 Months Later, I Bought the Gym Twice.

Posted 2026-11-13 by Fatima Zahra El Idrissi

January 2021: The quote that made me flinch

I own and operate two commercial gyms in a mid-size market — one runs about 200 check-ins per day, the other about 140. By late 2020, both were due for a full equipment refresh. I'd run the numbers, gotten quotes from four major brands, and sat down with my business partner on a cold Tuesday in January to finalize the decision.

The Cybex quote came in at roughly $580,000 for a full build-out across both locations: selectorized machines, plate-loaded stations, cardio decks, a dedicated rowing area, and the dumbbell zone. The competing quote — a brand I'll just call the cheaper option, because you can look up their pricing yourself — came in at $410,000.

A $170,000 gap. That's a full locker room renovation, or a year of marketing spend, or two new hires. I remember saying to my partner: "These machines are steel and pulleys. How different can they really be?"

I signed with the cheaper brand in March 2021. Install was done by June. Everything looked great for about 90 days.

September 2021: The first domino

The first sign something was off came when three treadmills started throwing motor error codes. Not all at once — one in week three, another in week five, a third in week seven. I called the rep. The response: "Those models are rated for 6 hours of continuous use per day. Are you exceeding that?"

Yes. It's a commercial gym. Some of our cardio machines run 12–14 hours on Saturdays.

Here's the thing about treadmill specs: a 3.0 HP motor and a 3.0 HP continuous duty motor are not the same animal. The cheaper brand's spec sheet listed peak power. Cybex — and I only learned this later when I actually sat in their showroom instead of reading PDFs — lists continuous duty ratings and backs them with commercial-use warranties. The distinction matters when your belt has been running since 5 a.m.

By November, I'd filed a warranty claim on all three units. The replacements arrived in January 2022. Two of those replacements failed by April.

November 2021: The leg press instruction mistake

This one hurt worse than the treadmills because it was my fault, not the equipment's.

We have a 45-degree leg press. When we installed it, I wrote a quick-use guide for the floor staff and posted a demo placard. My guidance: "Lower back stays flat against the pad, hips remain planted, press through mid-foot." Standard stuff, right?

Except the geometry of that specific machine — and honestly, this applies to a lot of plate-loaded leg presses, including the Cybex models we eventually bought — requires your hips to tuck slightly under as you descend past a certain depth. If you stay rigidly flat-backed, your pelvis lifts off the pad at the bottom of the range, which loads your lumbar spine at exactly the wrong angle. Two members tweaked their lower backs inside of a month. One filed a minor injury report. I had to pull the machine offline for two days while our head trainer re-taught the staff, who then re-taught the members.

If I'd spent thirty minutes on the Cybex showroom floor with their trainer, I would have caught this before a single member touched the machine. Instead I spent eleven hours rebuilding trust with two members and roughly $1,800 in comped memberships and one physio referral.

The fix: cue the hip tuck, reduce the depth stop by one increment, and post a new placard (which I had printed twice because I got the angle description wrong the first time — but that's a different story).

December 2021: The rower problem

We'd bought four magnetic resistance rowers for our conditioning area. Total cost: about $6,400 for the lot. By December, two of them wouldn't return to the catch position cleanly, and a third had a monitor that lost pairing every 90 seconds.

I started researching replacements and kept landing on Cybex water rowers. I dragged my feet because the price per unit was roughly triple what we'd paid. But here's the thing I should have recognized earlier: our members who actually row — the ones doing 2K tests and interval work — hated the magnetic rowers. The pull felt inconsistent, the resistance curve didn't match what they felt on water, and the monitors were unreliable. Meanwhile, the Cybex water rower has a fan base in the rowing community that I didn't fully appreciate until I talked to three local crew coaches who use them for dryland training.

We bought two Cybex water rowers in February 2022. They've been running daily since. One service call in 14 months — for a sticky handle return that took their tech twenty minutes to fix.

Should I have bought them in 2021? Yes. Do I regret the $6,400 experiment? Also yes. But I'll say this: if you're outfitting a gym and a water rower is even on your list, don't spend six months pretending a magnetic rower is "good enough." It isn't. Rowers who know what they're doing will notice immediately.

January 2022: The dumbbell gap

This sounds trivial. It wasn't.

Our dumbbell rack went from 50 lb straight to 60 lb. No 55s. We'd saved a little by trimming the increment count. But two of the most common accessory movements in any commercial gym are dumbbell lateral raises and dumbbell squat to press. The lateral raise especially — it's a small-muscle movement where a 10 lb jump is a 20% intensity increase. Our members were either loading up on the 60s (and swinging their hips to get the weight up, which defeats the purpose) or staying stuck at 50 forever.

One of our trainers finally brought it to my attention in February: "Do you know how many members are doing lateral raises with momentum because we don't have 55s?"

No. I didn't know. But once I watched a Saturday morning circuit class, I saw it immediately. Half the room was heaving 60 lb dumbbells up with a hip hinge that looked nothing like a lateral raise.

We ordered the missing weight increments in March. The cost of the 55 lb pair and the associated rack space: about $340. The cost of the two years of bad movement patterns our members developed because I wanted to save $340 on a $410,000 purchase: I can't quantify that, but I can tell you our trainers spent months undoing it.

April 2022: I did the math

By the time I sat down to actually tally what the "cheaper" option had cost us, the picture looked like this:

  • $410,000 in equipment
  • $47,000 in repairs and out-of-warranty replacement parts (treadmill motors, leg press pads, rower resistance mechanisms, and two broken selector pins on the chest press)
  • $38,000 for the treadmill replacement cycle alone (three replacements, two of which also failed)
  • Approximately $27,000 in lost revenue from partial-area closures during repairs (rough estimate based on check-in data during those windows)

Total sunk: roughly $522,000. And I still had failing equipment. The Cybex quote was $580,000. I was already 90% of the way to the "expensive" option, and I didn't even have working machines.

The numbers said: cut losses and finish the purchase with Cybex. My gut said I'd look like an idiot to my partner if I spent another $240,000 replacing things I'd just bought. I went with my gut for about six weeks. Then another treadmill died in June, and I called Cybex.

Where the numbers landed

By the end of 2022, I'd replaced about $240,000 worth of the cheap equipment with Cybex equivalents — the cardio deck, the rowing area, the dumbbell rack with proper 5 lb increments, and the leg press station. Total spend: roughly $650,000 across 18 months, versus $580,000 upfront with the Cybex quote.

That's a $70,000 premium for going the long way around. Plus the member churn I can't precisely calculate but can definitely feel — we lost 47 members between September 2021 and June 2022, and exit surveys cited "equipment issues" or "wait times while repairs were done" in a third of those.

What I'd tell the next buyer

Here's the honest part: I'm not telling you Cybex is the only right answer, because it isn't.

If you're outfitting a boutique studio with 30–50 check-ins per day and you're not running machines in 12-hour shifts, the math changes completely. A $410,000 build-out that lasts five years in a low-volume setting is a perfectly rational choice. The brand I bought may work fine for you. I mean that.

But if you're running a commercial floor where the cardio deck is occupied from open to close, the use case is different. Cybex's commercial warranties and continuous-duty motor ratings aren't marketing copy — they're the difference between a machine that survives 14 months and one that's still running at year five. I have both types in my facility right now, and I'm not guessing which is which.

Three things I'd do differently:

  1. Visit the showroom and touch the equipment. Not the PDF. Not the spec sheet. The actual machine. I would have caught the leg press geometry issue in ten minutes if I'd done that.
  2. Price the gaps, not just the headline. Missing 55 lb dumbbells cost me $340 and two years of bad lateral raise form. Missing continuous-duty treadmill motors cost me $38,000. Neither appeared on the original compare sheet.
  3. If rowing matters to your members, buy the water rower first. The Cybex water rower was the single easiest equipment decision I've made in five years — and I made it 14 months too late.

One more thing, because I promised myself I'd say it out loud: the leg press incident was a teaching failure, not a manufacturing defect. Whatever equipment you buy, train your floor staff on it yourself before a single member touches it. I thought I knew the cue. I was wrong. Two members paid for that.

That's the checklist now. It's taped to the inside of our equipment room door. I should have written it two years ago.

Fatima Zahra El Idrissi

Fatima Zahra El Idrissi

Fatima Zahra El Idrissi is an indoor playground and soft-play analyst specializing in modular play structures, climbing elements, slides, ball pits, toddler zones, net systems, protective padding, and inclusive play features. She uses ASTM F1918 and ASTM F1292 where applicable while examining use zones, head and neck entrapment, fall height, impact attenuation, guard openings, platform loads, sightlines, access, and cleanability. Her work assists FEC developers, schools, designers, inspectors, and operators with age zoning, circulation, supervision, maintenance, accessibility, and risk-informed equipment selection.